[Elecraft] K2 accessories order

[Don Wilhelm]

Ed,

To further address your original question --
If you add the KPA100 to the base K2, then those options that are 
mounted in the K2 top cover are not compatible with the KPA100. That is 
the KAT2, KIO2 and the KBT2.

If you wish to configure it as a complete K2/10 with a KPA100, consider 
mounting the KPA100 in an EC2 enclosure.  That is easiest done if you 
add the KAT100-2 along with the EC2 enclosure.  The KPA100 plugs right 
into the KAT100-2 board.  That does require that you have the KIO2 in 
the base K2.

73,
Don W3FPR

On 8/2/2015 7:07 PM, Edward T. Tanton wrote:
> I have K2 SN 00057. It is the most basic it can be. I stopped once it was
> working even though I had lots of the original add-ons because I was simply
> having too much fun.
>
>   
>
> So, here is my dilemma: I have ALL of the options except the KPA100,
> including updates & DSP, but have not yet installed any of them. I hope to
> even get the KPA100 for a combined late October birthday/Christmas. Does
> anyone have a list of a) what order I SHOULD install them in; & b) which
> ones should NOT be used with any others? (I understand the battery and I
> THINK the internal antenna tuner are not usable with the KPA100.) Thanks.
>
>   
>
>