[Elecraft] K2 40-Meter Alignment

[Don Wilhelm]

Aaron,

Can you peak the bandpass filter in receive?  Do that first.
Right now, you do not know if the problem is with the bandpass filter 
(L1 and L2) adjustment or whether you have another problem in transmit.
You may have to build the RF Probe (parts provided with your K2 kit) and 
do the Transmit Signal Tracing steps to find out where the source of the 
problem may be.

73,
Don W3FPR

On 8/2/2015 2:28 PM, Aaron Scott wrote:
> Trying to do the 40 m alignment and when I hit the Tune button the display
> shows P 0.4 through P 0.6 ad using the Alignment tool I go to adjust L1 and
> L2 to maximum as per instructions and the display does not change. I can't
> figure it out.
>