[Elecraft] KXPA100 antenna port selection from KX3

[Cady, Fred]

Fire up the KXPA100 Utility and check the Antenna configuration page.  In that page you can choose to allocate different bands to different antenna ports.  For those with no antennas on ANT2, say, it is a good strategy to inactivate all bands for ANT2 to avoid selecting that accidently and transmitting into an open.  You might have that situation.
Cheers and 73,
Fred
KE7X

Author of:
"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 - Going for the summit"
"The Elecraft KPA500 and KAT500 - the K-Line Dream Station"
Printed, coil bound copies of these are all available at www.elecraft.com
KPA500 and KAT500 Quick Set Up Guide
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide

KAT500 and KXPA500 Tuner Operation
http://www.ke7x.com/home/kat500-and-kxpa100-tuners

"The Elecraft KXPA100, PX3 and 2M/4M Transverters - Assembling the KX3-Line Station" available at www.lulu.com.

"The Elecraft K3S and P3"  and a 3rd Edition of the K3 book with K3S upgrade parts are works in progress.

> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
> Gee
> Sent: Sunday, August 02, 2015 11:11 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] KXPA100 antenna port selection from KX3
> 
> Cannot get the KX3 ANT select button to change antenna ports on the
> KXPA100. The KX3 display acknowledges ANT button push by displaying the
> inactive port but reverts to normal when display goes back to normal.
> Running latest firmware on the KX3.
> 
> Any ideas?
> 
> 
> 
> Sent from my iPad
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to fcady at ece.montana.edu