[Elecraft] remote viewing of NaP3

[Oliver Dröse]

Jeff,

simplest way is to mirror CAT signals to RRC's COM1 and connect that 
port to the PC.

73, Olli

Contest, DX & radio projects: http://www.dh8bqa.de


Am 01.08.2015 um 15:21 schrieb kb2m at arrl.net:
> I run local and remote every week as I travel from my main station location
> to my antenna restricted shore home. I don't have a problem swapping out the
> DB-9 serial port cable, the PTT cable, and the audio out cable when I switch
> over, it takes about a minute to do so. What I would like to do is split the
> serial cable from my local PC to the K3 and the RRC-1258. This would allow
> me to run my NaP3 panadapter s/w along with the RRC-1258, allowing me to
> view the panadapter at the remote control station with teamviewer. I tried a
> simple Y cable and it didn't work, anyone have this working? I have a copy
> of LP_Bridge running, maybe activate yet another virtual comport? I'm trying
> to keep this as simple as possible as I leave the frozen north for Florida
> for 7 months after the summer is over here and require a bullet proof
> setup....
>
> 73 Jeff kb2m
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to droese at necg.de
>