[Elecraft] [Elecraft_K3] Article: "Exploring the World Below 530 Kcs With a K3"

Wayne Burdick n6kr at elecraft.com
Thu Apr 30 00:04:56 EDT 2015


Hi Joe,

Great minds and all that :)  I did find a way to alter the .5-2.0 MHz filter so that it extends coverage down to 100 kHz at low loss. Very simple mod, which I will explain to those who volunteered, hopefully tomorrow.

This will be a receive-only range for the K3, even with the mods.

73,
Wayne
N6KR


On Apr 29, 2015, at 10:54 AM, "'Joe Subich, W4TV' lists at subich.com [Elecraft_K3]" <Elecraft_K3 at yahoogroups.com> wrote:

> 
> Wayne,
> 
> With the recent FCC announcement concerning the potential for a
> sliver band at 137 KHz, would converting the .500 - 2.00 MHz BPF
> in the KBPF3 to a LPF provide enough improvement in sensitivity
> to make 137 KHz usable? Might adding 500 - 1000 pF to C6 improve
> the situation below 500 KHz (I don't suspect a slight loss of
> sensitivity at the high end of the broadcast band would be a great
> problem since one tends to run the attenuator there anyway).
> 
> 73,
> 
> ... Joe, W4TV
> 
> On 2015-04-29 11:50 AM, Wayne Burdick wrote:
> > Fred, K6DGW, has written a short article describing some of what you
> > might find below the AM radio band using the K3 with a KSYN3A
> > installed (or any other radio with such coverage). You'll find
> > it here:
> >
> > http://www.elecraft.com/manual/Below%20AM%20Broadcast.pdf
> >
> > 73,
> > Wayne
> > N6KR
> >
> > __________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to lists at subich.com
> >
> __._,_.___
> Posted by: "Joe Subich, W4TV" <lists at subich.com>
> Reply via web post                       	•	 Reply to sender                       	•	 Reply to group                       	•	Start a New Topic           	•	Messages in this topic (2)                       
> VISIT YOUR GROUP 
> 	• New Members 8
> 
> • Privacy • Unsubscribe • Terms of Use 
> .
>  
> 
> __,_._,___



More information about the Elecraft mailing list