[Elecraft] K2 - computer interface

[Johnny Siu]

I mean P.13 of the KIO2 manual
73
Johnny VR2XMC
       寄件人︰ Johnny Siu <vr2xmc at yahoo.com.hk>
 收件人︰ Poul Erik Karlshøj (PKA) <PKA at telepost.gl>; "elecraft at mailman.qth.net" <elecraft at mailman.qth.net> 
 傳送日期︰ 2015年04月29日 (週三) 10:16 PM
 主題︰ K2 - computer interface
   
>From my memory with K2s, I need to construct a specific RS232 cable according the manual of KIO2.  Then I used a USB/RS232 converter with that cable.  It worked with the N1MM.
73
Johnny VR2XMC
       寄件人︰ Poul Erik Karlshøj (PKA) <PKA at telepost.gl>
 收件人︰ "elecraft at mailman.qth.net" <elecraft at mailman.qth.net> 
 傳送日期︰ 2015年04月29日 (週三) 10:09 PM
 主題︰ [Elecraft] K2 - computer interface
   


I used to connect (using HRD) my K2 to a laptop having serial ports using the specially configured cable (K2 > ATU > computer). Worked just fine.
Quite a few years ago I got the K3 and connected the K3 (using HRD)  to a computer with no RS-232 ports using a Targus PA088E USB/RS-232 converter cable. Works fine and I kind of forgot about the K2.

Now, recently I decided to try to connect (using HRD) the K2 using this Targus USB converter and cannot get HRD to connect.
Should I be able to connect K2 to the computer (WIN7)? As stated it works just fine with the K3.

I think there should be a lot of (happy) K2 owners who can help me!

73/OZ4UN
Paul


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to vr2xmc at yahoo.com.hk