[Elecraft] KX3 And SignaLink USB

[Dale LeDoux]

Don-

Yep!  I finally got that part right.

The brand-specific instructions were printed on the back side of a 2x3” yellow paper.  the other side showed where to put the jumpers.

Guess which side I didn’t read.

dale KG5GQM

> On Apr 25, 2015, at 7:32 AM, Don Wilhelm <w3fpr at embarqmail.com> wrote:
> 
> Dale,
> 
> Maybe I am late on this, but the SignaLink audio cables must plug into the MIC and PHONES jacks on the KX3.
> The ACC1 jack is for the RS-232 TXD and RXD signals - there is no audio on the ACC1 jack.
> 
> 73,
> Don W3FPR
> 
> On 4/24/2015 8:19 PM, Dale LeDoux wrote:
>> I read five months of archives looking for an answer.
>> 
>> I must be missing something.
>> 
>> I have a new KX3 and SignaLink USB adapter.  I can’t seem to make them work together.
>> 
>> I’m using the KX3cable supplied by TigerTronics.  I have tried plugging it into the Mic port and the ACC port.  neither of them seem to get anything into my computer.
>> 
>> I’ve tried both FlDigi and Digipan.  They work if I skip the SignaLink and cable direct from the MIC and ACC1 on the KX3 to the laptop’s mic and phone jacks.
>> 
>> I’d like to get the SignaLink working.
>> 
>> I’m open for help here.
>> 
>> tnx
>> Dale
>> KG5GQM
>> ex -KD5QI
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w3fpr at embarqmail.com <mailto:w3fpr at embarqmail.com>