[Elecraft] KX3 And SignaLink USB

[David Ahrendts]

Quite welcome, Dale. I got a little XBoom speaker meant for your iPod on Amazon. About the same size as the SignalLink box. Charges USB. More than enough just to monitor in the background. Best with everything and 73s.

David A., KC0XT, LA

> On Apr 24, 2015, at 6:07 PM, Dale LeDoux <dledoux at camtel.net> wrote:
> 
> Thanks to all the fine folk who replied.
> 
> I got it working.  I see the need for external speaker now.
> 
> dale
> 
> KG5GQM
>> On Apr 24, 2015, at 8:04 PM, k3ndm at comcast.net wrote:
>> 
>> Dale,
>>     I have a KX3 and a Signalink USB. They work great together. To make it work, you need to use software like Fldigi and make sure that you point the software to the external CODC, both input and output. Run the headphones out of the KX3 to the speaker input on the Signalink and the audio out of the Signalink to the mic input of the KX3. VOX is not needed as the Signalink will key the KX3, if you have the correct cable and have set the internal jumpers correctly. Use the knobs on the Signalink and the volume control and mic gain on the KX3 to set your levels properly. 
>> 
>>     A useful hint is to leave the headphones connected to the Signalink and use the aux to connect to an external powered speaker. That way you will only need to swap the mic for the Signalink cable when going from digital to phone or back.
>> 
>> 
>> 73,
>> Barry
>> K3NDM
>> To: "elecraft" <elecraft at mailman.qth.net>
>> Sent: Friday, April 24, 2015 8:19:41 PM
>> Subject: [Elecraft] KX3 And SignaLink USB
>> 
>> I read five months of archives looking for an answer.
>> 
>> I must be missing something.
>> 
>> I have a new KX3 and SignaLink USB adapter.  I can’t seem to make them work together.
>> 
>> I’m using the KX3cable supplied by TigerTronics.  I have tried plugging it into the Mic port and the ACC port.  neither of them seem to get anything into my computer.
>> 
>> I’ve tried both FlDigi and Digipan.  They work if I skip the SignaLink and cable direct from the MIC and ACC1 on the KX3 to the laptop’s mic and phone jacks.
>> 
>> I’d like to get the SignaLink working.
>> 
>> I’m open for help here.
>> 
>> tnx
>> Dale
>> KG5GQM
>> ex -KD5QI
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k3ndm at comcast.net
>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to davidahrendts at me.com




David Ahrendts   davidahrendts at me.com