[Elecraft] KX3 And SignaLink USB

[k3ndm at comcast.net]

Dale, 
I have a KX3 and a Signalink USB. They work great together. To make it work, you need to use software like Fldigi and make sure that you point the software to the external CODC, both input and output. Run the headphones out of the KX3 to the speaker input on the Signalink and the audio out of the Signalink to the mic input of the KX3. VOX is not needed as the Signalink will key the KX3, if you have the correct cable and have set the internal jumpers correctly. Use the knobs on the Signalink and the volume control and mic gain on the KX3 to set your levels properly. 

A useful hint is to leave the headphones connected to the Signalink and use the aux to connect to an external powered speaker. That way you will only need to swap the mic for the Signalink cable when going from digital to phone or back. 


73, 
Barry 
K3NDM 
To: "elecraft" <elecraft at mailman.qth.net> 
Sent: Friday, April 24, 2015 8:19:41 PM 
Subject: [Elecraft] KX3 And SignaLink USB 

I read five months of archives looking for an answer. 

I must be missing something. 

I have a new KX3 and SignaLink USB adapter. I can’t seem to make them work together. 

I’m using the KX3cable supplied by TigerTronics. I have tried plugging it into the Mic port and the ACC port. neither of them seem to get anything into my computer. 

I’ve tried both FlDigi and Digipan. They work if I skip the SignaLink and cable direct from the MIC and ACC1 on the KX3 to the laptop’s mic and phone jacks. 

I’d like to get the SignaLink working. 

I’m open for help here. 

tnx 
Dale 
KG5GQM 
ex -KD5QI 


______________________________________________________________ 
Elecraft mailing list 
Home: http://mailman.qth.net/mailman/listinfo/elecraft 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:Elecraft at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 
Message delivered to k3ndm at comcast.net