[Elecraft] P3 Transmit Monitoring Feature

[Joe Subich, W4TV]

Alan,

Thanks for the confirmation ... can't wait <G>.

73,

    ... Joe, W4TV


On 2015-04-20 12:45 PM, Alan Bloom wrote:
> The SVGA option is not required for the TX monitor feature.  It does
> require a small option board which fills one of the unused holes on the
> P3 back panel and an external power sensor similar to a W2 wattmeter
> sensor.  The only difference from a standard W2 sensor is several
> capacitors have a smaller value to improve the bandwidth for the
> modulation envelope display.
>
> The new firmware to support the sensor is pretty far along.  The main
> thing we're working on right now is the aesthetics of the "meter"
> displays that show the PEP/average power and SWR.
>
> Alan N1AL
>
>
> On 04/20/2015 08:23 AM, Joe Subich, W4TV wrote:
>>
>> At one time Wayne said the SVGA would not be required but I
>> have not seen further confirmation or any word of a change.
>>
>> I don't have the SVGA either and hope it will not be a
>> requirement as the cost of SVGA plus sensor really tips the
>> cost/benefit equation.
>>
>> 73,
>>
>>    ... Joe, W4TV
>>
>>
>> On 2015-04-20 10:14 AM, Jim Miller wrote:
>>> Will the SVGA add on be required for this?
>>>
>>> I do not have it yet.
>>>
>>>
>>>
>>> Thanks, 73, Jim KG0KP
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to lists at subich.com
>>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n1al at sonic.net
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>