[Elecraft] KX3 connection to doublet question

[stan levandowski]

Yeah, I think so ;-).  I'm using "real" (read "stiff") window line so 
trying to connect it directly to the KX3 via a dual BNC just sounds like 
more springy trouble than it's worth.  This installation is in my home, 
not in the field. So I can get a good clean run through the wall and 
away from metal, wire, etc. right to my rig.  BalunDesigns sells a very 
nice QRP isolation balun Model 1110 (actually good to 200 watts) which I 
can mount on the wall and then just run a 2 foot PL259 to BNC jumper to 
my rig.  So I guess Problem Solved!


Thanks,
Stan WB2LQF

On Mon, Apr 20, 2015 at 02:24 PM, Wes (N7WS) wrote:

> I think you answered your own question.
>
> On 4/20/2015 8:42 AM, stan levandowski wrote:
>> [snip]
>>
>> I can't think of any reason this would be necessary except as a 
>> transition from the window line to a convenient coax output to the 
>> KX3.
>>
>>
>> What would the KX3 prefer??
>>
>>
>> Thanks,
>>  Stan WB2LQF
>> ______________________________________________________________
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to sjl219 at optonline.net
>