[Elecraft] P3 problem

[Ross Biggar]

Thanks Quentin, I missed that cable completely in fact it had adrift from the K3 and the P3.
Your email helped, all works again now .
Thanks
Ross
ZL1WN

From: QUENTIN COLLIER 
Sent: Saturday, April 18, 2015 7:41 PM
To: Ross Biggar 
Subject: Re: [Elecraft] P3 problem

It's not something as simple as the IF - P3 coax link having become disconnected or failed is it Ross? That would give the symptoms you describe....you've probably tried that already but thought I would mention it ! Good luck fixing.....



73, Quin G3WRR  


--------------------------------------------------------------------------------
From: Ross Biggar <rbiggar at ihug.co.nz>
To: elecraft at mailman.qth.net 
Sent: Saturday, 18 April 2015, 6:51
Subject: [Elecraft] P3 problem


My P3 has been working perfectly until this afternoon, but suddenly it has stopped showing any signals on the screen.
I can still see the base noise, (at say –135db) but no signals. It is communicating to the K3, as the K3 frequency is being shown
on the screen and the frequency alters as the K3 is tuned.
Ideas please as to how I get the P3 to show signals again.

Thanks
Ross ZL1WN
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to q.g.collier at btinternet.com