[Elecraft] New 30A power supply on Elecraft order form

[Eric Swartz - WA6HHQ, Elecraft]

fyi

Eric
elecraft.com
_..._



> On Apr 15, 2015, at 8:37 AM, Wayne Burdick <n6kr at elecraft.com> wrote:
> 
> 
>> On Apr 15, 2015, at 7:48 AM, Edward R Cole <kl7uw at acsalaska.net> wrote:
>> 
>> One question is how low voltage can be adjusted.  Amps are designed for 12.0 volts.
> 
> Ed,
> 
> All Elecraft 100-W amplifiers are designed for optimal performance at about 14 V (as measured at the DC jack on key-down). This includes the K3's and K2's internal 100-W amps as well as the KXPA100. They will certainly run from lower voltages -- down to about 10.5 to 11 V -- but for home use, we recommend setting the DC supply to 14.0-14.2 V. They'll run from as high as 15 V, though again, around 14 V optimizes power output, IMD levels, and efficiency.
> 
> 73,
> Wayne
> N6KR
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to elist_copy at elecraft.com