[Elecraft] k3 kx3 memory editor rejects 60 meter entries

[Don Wilhelm]

Neil,

I don't know why you are having trouble with the K3/KX3 Frequency Memory 
Editor, but I have not tried it on 60 meters, so there may be a glitch 
unknown to me.

It is easy enough to record the frequency memories from the front 
panel.  First set to the frequency/mode/etc. that you want on the radio, 
and then refer to page 16 of the K3 manual (page 17 if dealing with the 
KX3) and follow the simple instructions to store those settings into 
memory, and tag them with labels if you so desire.
I long ago saved the 60 meter channels into my K3 memories for channel 
hopping and have not touched them for years.
You might want to look at the channel hopping and scanning sections in 
the manual as well - it makes operating on the channelized 60 meter band 
much easier.

73,
Don W3FPR

On 4/10/2015 6:31 PM, Neil Collesidis wrote:
> I've spent enough time searching and playing around that it's worth 
> asking the group:
> Is there a workaround for putting 60 meter frequencies into the K3/KX3 
> Memory Editor?
> It rejects them.
> Thanks es 72, Neil aa1sb