[Elecraft] 50 W dummy load with UHF female connector

[ab2tc]

Hi,

This is may favorite, recommended by many on this reflector:

https://www.ridgeequipment.com/store/dummyloads.html

It will outperform anything you can build yourself, kits included, with its
SWR well below 1.05 up to well above 1GHz. Don't forget to add the N to
SO239 adapter which will add up to still bargain $17. Tighten it up good
with a wrench and you will never notice it's there. The little 50 ohm BNC
terminators are a bargain, too.

AB2TC - Knut


todd ruby-2 wrote
> Hi,
> Can anyone recommend what they feel is the best 50 W dummy load with a UHF
> female connector that I can use to make K3 TX calibrations?
> 
> thanks
> 
> todd
> 
> WB2ZAB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:

> Elecraft at .qth

> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to 

> lists+1215531472858-365791 at .nabble





--
View this message in context: http://elecraft.365791.n2.nabble.com/50-W-dummy-load-with-UHF-female-connector-tp7601176p7601181.html
Sent from the Elecraft mailing list archive at Nabble.com.