[Elecraft] K3 no power

[Keith Onishi]

I have had similar problem before. Expertly helped by Elecraft support, I found the PIN diode on the RF board was broken.
I would suggest you to talk to Elecraft support.

73 de JH3SIF, Keith

> 2015/04/05 8:06、Mike Reublin NF4L <nf4l at comcast.net> のメール：
> 
> My K3 puts out no power in any mode, either on the SteppIR or into a dummy load. It's not in test or split. TX INH is off. Holding tune results in the LCD displaying 0 W, and the VFO A area changes to 2 dashes on the right, no digits. Tune power is set to 50W, Power to 100W.
> 
> A 50W TX Gain calibration passed, but still no joy.   
> 
> It seems to be hearing OK.
> 
> What have I fat fingered?
> 
> 73, Mike NF4L
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jh3sif at sumaq.jp