[Elecraft] Elecraft] KAT500 Feature Request

Dan Baker km6cq at km6cq.com
Fri Apr 3 23:34:11 EDT 2015


Only on 160 does it hunt when placed in the manual mode. I am not sure why
since I
am using a 160 loop.

Dan

On Fri, Apr 3, 2015 at 8:04 PM, Fred C. Jensen <k6dgw at foothill.net> wrote:

> Sometime back, a FW update has the Tuner following as you tune.  You don't
> have to tx.  Put tuner into manual after training.
>
> 73,
>
> Fred K6DGW
> TDY Sparks NV
>
> Tom Blahovici <tomb18 at videotron.ca> wrote:
> >Hi
> >I think this is more or less in place now. If you put the tuner in manual
> mode,  it will only tune if you press tune and then hold this setting. When
> you tune to a different location it automatically will load the existing
> tune settings.
> >What I have done is a manual tune every 20 kHz or so and kept the tuner
> in manual. Thus it always "locks"  the settings.
> >Tom
> >va2fsq.com
> >
> >On Apr 3, 2015 9:51 PM, Dan Baker <km6cq at km6cq.com> wrote:
> >>
> >> I would find it very useful to have a "Lock" button on the tuner, let me
> >> explain.
> >> A "Tap and Hold" on the Tune button would lock the tuning solution in
> place.
> >> Then another "Tap and Hold" or moving the VFO would unlock it. This
> would
> >> be very effective at times.
> >>
> >> Thank you for your consideration and happy Easter.
> >>
> >> Dan, KM6CQ
> >> ______________________________________________________________
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to tomb18 at videotron.ca
> >______________________________________________________________
> >Elecraft mailing list
> >Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >Help: http://mailman.qth.net/mmfaq.htm
> >Post: mailto:Elecraft at mailman.qth.net
> >
> >This list hosted by: http://www.qsl.net
> >Please help support this email list: http://www.qsl.net/donate.html
> >Message delivered to k6dgw at foothill.net




-- 
KM6CQ
Dan Baker
www.km6cq.com
@danielbaker
DM09dn
SKCC: 8260  NAQCC: 6817
QSL via LoTW, eQSL, & Direct.
D-Star REF014C


More information about the Elecraft mailing list