[Elecraft] Low Serial Numbered K3

[Don Wilhelm]

Darryl,

I would say no problem at all.  consistent with the Elecraft upgrade 
policy, even the earliest K3 can be upgraded to the most recent level.  
If all the hardware updates have been applied and the firmware updated, 
it is just as good as a brand new K3.

If you want to check an older K3 to see if the hardware mods have been 
installed, go to the Mods and Notes tab on the Elecraft website 
www.elecraft.com and download the applicable mod instructions - most of 
them tell you how to check to see if the mod has been installed - some 
may require physical inspection, but others can be determined by easier 
means.

73,
Don W3FPR

On 9/22/2014 11:18 PM, Darryl J Kelly wrote:
> Any problems with buying a K3 with a low serial number, say that has
> had hardware updates and alignments?
> Darryl, KK5IB
>