[Elecraft] Freq Editor req for update - allow entry of WX freqs

[Phil Wheeler]

Hey, Joe --

 From the Elecraft KX3 Module FAQ:

*Q:What frequency range will the module cover?*

A:On 2 meters: About 120 to 165 MHz, allowing copy 
of weather-band stations at 162 MHz, airport tower 
AM in the 120 MHz range, etc. On 4 meters: About 
65-72 MHz. Sensitivity gradually falls off outside 
the associated ham bands.

Phil W7OX

On 9/20/14, 3:33 PM, Joe Subich, W4TV wrote:
>
> The K3/KX3 can't tune those frequencies ... even 
> with the
> 2 meter transverters.  Those frequencies would 
> be well above
> 30 MHz (IF limit).
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 2014-09-20 5:31 PM, Jeff Herr wrote:
>> Would it be possible to get the k3/kx3 freq 
>> memory editor ver 1.3.3.0
>> updated to allow entry of the NOAA weather 
>> channels?
>>
>> 162.400, .425, .450, .475, 162.500, .525, .550
>>
>> currently i get a little red exclamation mark 
>> error.
>>
>>
>>
>> Jeff Herr,  WW6L
>> 4636 Kelton Way
>> Sacramento, Ca 95838
>> 916.925.6089