[Elecraft] REV

[Joe Subich, W4TV]

It is likely that DX4Win is polling for some item other than IF;
and is getting an '?' response while you are holding the REV
button.  Looking at polling data while holding the REV button,
I see the K3 responding '?' (Busy) when receiving FA;, FB;,
IS;, FW; and several other frequency/mode related polls.

I'd guess that DX4Win does not properly handle a busy response.

73,

    ... Joe, W4TV


On 2014-09-15 7:48 PM, Mike Greenway wrote:
> When using SPLIT, and using the REV button to listen the pileup I often get disconnected from my logging program.  I use DX4WIN and have tried different polling rates.  It does not always happen as when I try to duplicate it I can hit REV 50 or 60 times but then when working a pile up out of the blue I will get a warning from the logging program saying it has disconnected from the K3.  I use a standard serial port and not a USB to serial.  The only time this ever occurs is when using the REV function.  I have also had it happen when not in SPLIT, but just using the REV function.  Anyone else ever run into this?  73 Mike K4PI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>