[Elecraft] K3 and preamp

[Walter Underwood]

See “VFO B Alternate Displays” on page 36. The displays are “AFV” and “dbV”.

http://www.elecraft.com/manual/E740107%20K3%20Owner's%20man%20D10sm.pdf

wunder
K6WRU
CM87wj
http://observer.wunderwood.org/

On Sep 5, 2014, at 3:25 PM, Jim Rogers <jim.w4atk at gmail.com> wrote:

> Well, I missed it too. Where do we find this internal audio voltmeter.  It isn't is my manual's index. ??
> 
> 73s Jim, W4ATK
> 
> On 9/5/2014 1:04 PM, Phil Hystad wrote:
>>>  ...<cut>... Use the K3's internal audio voltmeter to determine this.  Turn off AGC, with the antenna connected, calibrate the dB readout to zero following the instructions in the manual, then remove the antenna.
>>> 
>>> 73, Jim K9YC
>> Here I have been a K3 owner for several years and I never knew that there was an internal audio voltmeter.  I admit to maybe having missed this in reading the documentation but every time Jim (K9YC) speaks, I learn something.
>> 
>> 73, phil, K7PEH
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jim.w4atk at gmail.com
>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org