[Elecraft] P3 grounding lug?

[Jim Miller]

Don

Thanks!

jim


On Tue, Sep 2, 2014 at 8:33 PM, Don Wilhelm <w3fpr at embarqmail.com> wrote:

> Jim,
>
> Remove any convenient screw and put an internal tooth
> #4 solder lug under it to serve as a bonding point for the P3 enclosure.
>
> Jim, K9YC will likely point out the "pin 1" problems and may offer
> additional suggestions.
>
> 73,
> Don W3FPR
>
>
> On 9/2/2014 8:16 PM, Jim Miller wrote:
>
>> Still would like to bond the P3.
>>
>>
>>
>
>