[Elecraft] PX3 Impressions

[Jim Brown]

On 10/26/2014 12:32 AM, Bill Frantz wrote:
>> *Received the PX3 on the 9th ~ assembly was straight forward with a 
>> little
>> assistance from tech-support**. OOPS, I placed the bezel on the 
>> wrong-side
>> of the front panel = end-plate doesn't  fit well that way. :-)
>
> I did that too. After I had corrected the error and finished assembly, 
> I then down loaded the manual errata sheet which had warnings not to 
> install the bezel on the inside. 

I made the same mistake.

73, Jim K9YC