[Elecraft] KX3 + KXPA100 and ACC1

[David Ahrendts]

Indeed it is! Thanks for answering a newby. 
Now, another question for all of you: is there any complication that typically develops when running the 100 watt KXPA100 into a higher power liner amplifier. In my case, an Ameritron ALS-600S. I am aware of the switching cable phono plug on the KXPA100 that has to connect to the Ameritron external on-off relay.


> On Oct 23, 2014, at 10:05 AM, Matt VK2RQ <matt.vk2rq at gmail.com> wrote:
> 
> The ACC1 port is split out on the KXPA100 itself -- plug your PC into the "PC" side ACC1 port on the KXPA100, and the KXPA100 will forward any KX3 commands to the KX3 (ie. it is basically a "daisy chain" connection topology)
> 
> 73,
> Matt VK2RQ
> 
>> On 24 Oct 2014, at 3:38 am, David Ahrendts <davidahrendts at me.com <mailto:davidahrendts at me.com>> wrote:
>> 
>> KX3 serial 6-thousand something is born. Very impressed. What a tight little machine. Maiden QSO last evening using the KXPA100 @ 110 watts. This is a very efficient combo: under 5 watts easily excites the KXPA100 to it’s max. Here’s my question: the KXPA100 cable takes up the ACC1 and ACC2 slots. I would really like to use one of the software spectrum displays (maybe iSDR for the iPad, or a Mac equivalent). However, they require ACC1 out. Can ACC1 be split somehow for two devices?
>> 
>> David Ahrendts, KC0XT, Los Angeles 
>> 
>> 
>> 
>> David Ahrendts   davidahrendts at me.com   
>> 
>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to matt.vk2rq at gmail.com <mailto:matt.vk2rq at gmail.com>



David Ahrendts   davidahrendts at me.com