[Elecraft] Split Operation with 2 receivers

[dmb at lightstream.net]

Mike,

Try this:

-- Tune your main VFO to 3705

-- Tap the "A > B" button twice (to sync both VFO A and B)

-- Push and hold the "SUB" button until the VFO B display area indicates
"DIVRSTY", after which you should see the decimal point in the main
display flashing slowly as confirmation that you are in diversity mode.

-- Push and hold the SPLIT button (A > B) to engage 'SPLIT' operation

-- Tune VFO B to 3825

-- Push and hold the "RX ANT" button and make sure the display indicates
"AUX" and not "MAIN" (repeated button pushes toggle it between both of
those settings) so that you can use a separate receiving antenna for VFO-B

That should do it.

73, Dale
WA8SRA



> Is there any way to transmit on say 3825 and listen with both receivers on
> say 3705?  Obviously I would be listening with two different antennas
> (maybe
> the transmit antenna and a rx antenna).
>
>
>
> Thanks,
>
>
>
> Mike W9RE
>