[Elecraft] KX3 2metre module installation

[Matt VK2RQ]

I also installed the 2m module without incident. It doesn't work so well if you have dual watch enabled in FM mode though -- it's not really a valid use case, but if the user ends up in that configuration inadvertently, it may leave them wondering why they can't key up a repeater.

73,
Matt VK2RQ

> On 22 Oct 2014, at 9:07 pm, Barry Middleton <bajubranston at ntlworld.com> wrote:
> 
> Hello,
>           Just have to say that the installation of the 2 metre module in my KX3 went very smoothly, even these 78 year old hands managed the mini co-ax connectors. However when it came to upgrading the firmware I had a small problem, the MCU 2.23 installed with no problem, but Mr Murphy stepped in on the DSP 1.30, in the middle of loading I suffered a power cut, it didn't like that one bit. Still after the power returned all went smoothly. The sensitivity is far better than my other 2 metre rigs, so thank you Elecraft for a first class product.
> 
>                73 de
> 
>            Barry k Middleton G4DBS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to matt.vk2rq at gmail.com