[Elecraft] setting up Fldigi

[Joe Subich, W4TV]

Signalink USB does not provide a serial control interface for the rig.

You will not be able to control the K3 with *only* Signalink USB - you
will need a traditional serial port, USB to serial adapter, or another
interface that includes the USB to serial adapter function.

With the proper hardware there is no problem controlling the K3 from
fldigi or most other digital and/or logging programs that provide for
rig control.

73,

    ... Joe, W4TV


On 2014-10-21 11:08 AM, JAY wrote:
> Hi All,
> I am in the process of getting started with digital operations.
> I have a Signal Link USB connected to the K3. I have been able to RX and TX
> but know would like to us rig control is this possible at this time. I see
> on the web site for Fldigi that the K series is a Beta state.
> I would like to change freq on the K3 and have the display change with it
> like logging programs.
> I hope that this is possible at this time.
> Thanks in advance!!!!
>