[Elecraft] K3/MMTTY/Signalink Problem

[Don Wilhelm]

Paul,

I fear there is something in your setup between the K3 and MMTTY that is 
causing your problems.
In addition to the K3 manual, review the MMTTY help file to see if you 
can discover what that may be.
We can only guess about what your problem may be - what I can say is 
that if the tones are correct, the K3 will transmit in AFSK A.
Once you figure out what is wrong with the setup, you will likely do a 
good 'forehead slap'.
You had once mentioned "backwards" RTTY - you should not have ALT set on 
the K3 nor reverse set in MMTTY when using AFSK A because AFSK is LSB 
which is normal for RTTY.

73,
Don W3FPR

On 10/14/2014 5:56 PM, paul ecker wrote:
> I have the Pitch in AFSK set the same as the mark in MMTTY. I am using 
> Signalink USB external sound card and the K3 and MMTTY.
>
> But the question remains, if I set K3 mode to AFSK I get no power out 
> or no Diddles. With Data A I do get power out and Diddles. Why is that 
> ??  Even though using Data A I get some power out , why the lower 
> power then what I have the K3 set out ??
>
>