[Elecraft] K3/MMTTY/Signalink Problem

[Joe Subich, W4TV]

> I do the same, and for the same reason. But it's not only the .ini
> file that must be edited -- there's another file that defines the
> various decoder settings that can be selected from a pull-down menu
> or cycled through.

userpara.ini - it only comes into play if one uses the "Profiles (S)"
menu.

73,

    ... Joe, W4TV


On 2014-10-14 12:26 PM, Jim Brown wrote:
> On Tue,10/14/2014 5:17 AM, Wes (N7WS) wrote:
>> I like to use lower tones (915) because I listen to the incoming
>> signal and the high tone drives me nuts.  MMTTY defaults to 2125. If
>> you use profiles then it's best to edit the .ini file directly and set
>> these.
>
> I do the same, and for the same reason. But it's not only the .ini file
> that must be edited -- there's another file that defines the various
> decoder settings that can be selected from a pull-down menu or cycled
> through. I don't recall the name of that file, but like the .ini file,
> it's plain text and in the same directory. There are about ten instances
> of the setting that must be changed.
>
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>