[Elecraft] OT tower disassemble tool

[Guy Olinger K2AV]

Are you actually going to climb Rohn 25 that has been up in the air for 20+
years, for disassembly? Consider taking the thing down with a crane,
supporting it at the top with the crane and cut the bottom off, then lay it
down with the crane. As soon as you loose the top guys there are all kinds
of age-related things that can go wrong down below.

You should take this subject onto the TowerTalk reflector.

73, Guy K2AV

On Mon, Oct 13, 2014 at 10:26 PM, Robert G Strickland <rcrgs at verizon.net>
wrote:

> I have to take down a 60ft Rohn-25 tower that's been up for 20 plus years.
> I remember seeing a tool advertised in QST and CQ for just this purpose. It
> resembled a long "lever" that was dimensioned for Rohn-25 specifically and
> helped to pry the sections apart. Any leads to this "tool" would be greatly
> appreciated. Thanks in advance.
>
> ...robert
> --
> Robert G Strickland, PhD ABPH - KE2WY
> rcrgs at verizon.net.usa
> Syracuse, New York, USA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2av.guy at gmail.com
>