[Elecraft] KX3 RTTY Diddle

[Don Wilhelm]

Alan has it right, my error - the ALT button swaps sidebands, REV swaps 
VFOs until the button is relaeased.

Thanks for catching that Alan.

73,
Don W3FPR

On 10/11/2014 3:03 PM, Alan wrote:
> > I have not tried it, but the REV button should swap sidebands
>
> ALT button, right?
>
> Alan N1AL
>
>
> On 10/11/2014 11:58 AM, Don Wilhelm wrote:
>> Howard,
>>
>> Yes, see the bottom of page 18 (lefty column) in the KX3 Owner's Manual.
>>
>> The IM command must be sent like a CW prosign (as one character). You 
>> can also add it to the end of CW or RTTY memories.  It will be 
>> ignored in CW mode - allowing the use of CW memories also for RTTY.
>>
>> I have not tried it, but the REV button should swap sidebands and I 
>> believe that is equal to swapping mark and space that you are asking 
>> about.
>>
>> 73,
>> Don W3FPR
>>
>> On 10/11/2014 1:11 PM, k2ud at roadrunner.com wrote:
>>> Is there a method to inhibit diddle on RTTY transmit on the KX3?  
>>> Also, is there a method to swap mark and space (operate backwards) 
>>> on RTTY transmit?
>>>
>>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n1al at sonic.net
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com
>