[Elecraft] K2 and installing KSB2 & 160m

[Steve & Anne Ray]

I used computer jumpers for the configuration header mic connector and they
work great.   I also took a computer jumper, and used a Demel tool to cut a
computer jumper in two, then soldered a surface mounted 10 K resistor across
the terminals.  The surface mounted resistor came from an old computer
board.  This jumper goes to the 5V terminal on the mic configuration header.
I use this for the bias for a computer mic that requires 5V.  

 

73,

Steve K4JPN

www.thewinstonator.com/K4JPN.htm