[Elecraft] BNC connectors for RG-8X Coax

Joel Black w4jbb at charter.net
Thu Oct 9 07:34:09 EDT 2014


Sorry if this is a duplicate. I didn't see it post and I want to make 
sure my previous post (mistake) gets corrected.

73,
Joel - W4JBB


-------- Original Message --------
Subject: 	Re: [Elecraft] BNC connectors for RG-8X Coax
Date: 	Thu, 09 Oct 2014 05:49:47 -0500
From: 	Joel Black <w4jbb at charter.net>
To: 	elecraft at mailman.qth.net



Umm... Phil, I got the part number incorrect.

Honestly, I'm not sure what I ordered or from whom. The part number I
gave you was for a Pro-flex cable so disregard that part number. That
part number is from a diagram on connector assembly (it had been 25
years since I put a BNC connector together and that was in tech school).

That said, RF Industries does make solder-pin / clamp connectors and The
Wireman sells solder-pin / clamp connectors for RG-8x. Call and ask
them, but it looks like their (The Wireman) part number for a male BNC
for RG-8x is 1308. The RG-8x BNC connector from RF Industries is an
RFB-1101-1X.

Sorry for the confusion.

73,
Joel - W4JBB

On 10/9/14, 5:38 AM, Joel Black wrote:
> Phil,
>
> When I need one, I have been using the RF Industries RFB-1101-1P.
> These are solder-pin / clamp connectors. I don't remember from where
> they were purchased.
>
> I don't remember what put me on these. I use them indoors only from my
> KX3 to an antenna switch and from the RX connector on my K3 to an
> antenna switch. I also have a 25' piece of RG-8x with a PL-259 on one
> end and the BNC on the other for when I go to the park and operate. I
> have not had any failures with them; your mileage may vary. :)
>
> 73,
> Joel - W4JBB
>
> On 10/9/14, 12:18 AM, Phil Hystad wrote:
>> I am looking to use BNC (male) connectors for RG-8X cable.  I have
>> found a number of crimp style connectors but I am wondering if there
>> are any other kind to consider.  Are the crimp style the best for
>> reasonable cost?
>>
>> My application does not need to be weather protective -- all use
>> indoors.
>>
>> Thanks,
>>
>> 73, phil, K7PEH
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to w4jbb at charter.net
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w4jbb at charter.net





More information about the Elecraft mailing list