[Elecraft] [K3] Using NaP3 in AFSK A mode

[Barry LaZar]

Interesting. I was beginning to think something like that, but I had to 
data to support that.

I was running V4 for a while, but I had trouble with it playing nice 
with some other stuff I run. So, I dumped it and went back to V3.1. This 
configuration appears to be quite stable and plays nice with the rest of 
my software. I do us CW Skimmer vice datatext. I find the demod in 
Skimmer works a bit better than the demod on the KX3 and I found the 
display of calls over signals both neat and overwhelming on my monitor. 
So I guess I'll stay with what is working here; I guess it's a matter 
now of it it isn't broke, don't fix it.

73,
Barry
K3NDM

On 10/3/2014 3:26 PM, Richard Ferch wrote:
> K3NDM wrote:
>
>>      You're right. I didn't understand what you were trying to do. I
>> would never have seen what you are referring to as I wouldn't operate as
>> you describe; it never occurred to me to do so. And, I use NaP3 V3.1
>> which may also have some subtle differences.
>> If I get some time, I'll need to play and see what I can discover, but
>> I'll need to do a little station reconfiguration first. I would like to
>> know more.
>
> I believe the problem only exists in v4; as far as I know v3 is OK in 
> this respect.
>
> 73,
> Rich VE3KI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k3ndm at comcast.net
>