[Elecraft] Using K3 (or KX3) Macros for custom SPLIT functions

[Joe Subich, W4TV]

That doesn't address the issue of resetting the VFO B mode when
pressing split (or when an external program commands split) if the
modes are different e.g., SSB vs. DATA or CW vs. DATA or the VFOs
are on different bands (VFO IND = YES).

73,

    ... Joe, W4TV


On 2014-10-03 11:04 AM, Wayne Burdick wrote:
> For those who may have missed this when I first described it--
>
> * * *
>
> In a recent discussion about SPLIT, many proposals were made (too
> many :)  Others argued for no change.
>
> With this in mind, we've created a new "switch macro" feature. It
> allows you to create your own variation on SPLIT -- or any other radio
> function -- and execute it with a single switch press. In effect,
> you'll be creating your own custom firmware for the K3 that automates
> control sequences you use most.
>
> Example #1 (SPLIT+2):
>
>     A>B
>     A>B
>     SPLIT
>     VFO B up 2
>     RIT and XIT off
>
> Example #2 (WEAKSIG):
>
>     Sub ON
>     Diversity mode
>     main/sub preamps on
>     200-Hz bandwidth
>     center passband
>
> Many other combinations are possible, limited only by the K3's remote-
> control command set and the macro length limit (presently 56 bytes).
> You'll be able to set VFO frequencies or RIT/XIT offsets, adjust gain
> or filter controls, and virtually "tap" or "hold" nearly any control
> on the radio.
>
> First, you enter a sequence of K3 control commands into one or more
> macros using K3 Utility, which can store them in the K3's EEPROM.
> Next, you assign the macros to any of the K3's 10 programmable
> function switches (PF1, PF2, M1-M4 tap, or M1-M4 hold) using the new
> MACRO menu entry.
>
> After that, activating the switch will perform the desired functions,
> and the name of the macro will flash on VFO B as a reminder (e.g.,
> "SPLIT+2").
>
> * * *
>
> Many K3 (and KX3) owners are using such macros to obtain exactly the splits that they prefer.
>
> 73,
> Wayne
> N6KR
>
>
>
>