[Elecraft] [KX3 MCU:2.27] Strange behavior of PBT

[Peter Eijlander (PA0PJE)]

I think it's more the strange thing to be able to set it at 0.00.
This happens on LSB too but to me there is no audible difference at all 
between 0.00 and 0.05 and one cannot set 3.00 because all settings end 
on 5 in SSB. Probably next FW update will be the inability to set the 
low PB slope to 0.00 in SSB. I never use a low cut under 0.25 anyway...

73,
Peter

Op 28-11-14 om 15:56 schreef JE0LFI:
> Hi.
>
> The PBT of firmware version 2.27 of KX3 has strange behavior.
>
> If you select the USB mode at least once, you can't set the PBT to "LOW:
> 0.00 HI: 3.00".
>
> After you have set the LOW to 0.00, you can not set the HI to 3.00.
>
> The LOW will become automatically 0.05. Therefore, the value of the HI will
> become 3.05.
>
> 73,
>
> JE0LFI / nakamura
>
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/KX3-MCU-2-27-Strange-behavior-of-PBT-tp7595168.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pa0pje at xs4all.nl
>