[Elecraft] K2 plus N1MM logger in CW

[Pete Smith N4ZR]

One of the N1MM+ developers solved a CW stutter problem today for one of 
our users, which was caused by latency in a USB-to-serial adapter.  The 
solution was to make sure you're using an FTDI adapter, and go direct to 
the manufacturer for the latest version of the driver.

73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.

On 11/25/2014 2:58 PM, Jim Brown wrote:
> Thanks. I'll try that.
>
> 73, Jim
>
> On Tue,11/25/2014 10:51 AM, Chester Alderman wrote:
>> This is one of the very few times I have to disagree with Jim! N1MM 
>> and NL+
>> keys my K3 flawlessly up to about 95 wpm. Having been a QRQ operator,
>> running speeds up to 120 wpm, stuttering CW is something I just can't 
>> stand.
>> If one is using the Windows operating system, YOU MUST GO INTO THE 
>> OPERATING
>> SYSTEM AND TURN OFF WINDOWS GENERATED SOUNDS!!
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n4zr at contesting.com
>