[Elecraft] "Subject [KX3] Keyport2"

[Cady, Fred]

Hi Tom,
A mating plug for the KXPD3 paddle input connector is http://www.digikey.com/product-detail/en/PPPC022LJBN-RC/S5555-ND/776013.
This is a PC mount  but I would think you could connect wires to it.
Cheers,
Fred KE7X

"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 - Going for the summit"
"The Elecraft KPA500 and KAT500 - the K-Line Dream Station"
Printed, coil bound copies of these are all available at www.elecraft.com
KPA500 and KAT500 Quick Set Up Guide
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide


> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
> tom and debbie rice
> Sent: Tuesday, November 25, 2014 4:29 PM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] "Subject [KX3] Keyport2"
> 
> I am interested a 4-pin connector for the front "Keyport2." I see that
> Palm Radio has a mounting kit for there Pico key that includes a 4-pin
> connector with a pigtail but you have to the buy the kit which includes
> the mounting plate etc. I would like to be able to connect to both Key
> Ports simultaneously. Has anyone found a supplier the sells the female
> 4-pin plug with a pigtail? I would appreciate any info on suppliers
> including part#, etc.
> Thank you,
> Tom Rice  WB3FAE
> 
> ---
> This email is free from viruses and malware because avast! Antivirus
> protection is active.
> http://www.avast.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to fcady at ece.montana.edu