[Elecraft] GND Connection Between KX3 & KXPA100

[stan levandowski]

I just bought a KXPA100 and I'm not using any "ground" between it and 
the KX3. My station is on the second floor and I use a balanced antenna 
in my attic so I don't have either a "station ground" beyond the house 
wiring's 3rd prong nor do I have an "RF ground." I have no problems and 
no RFI either.


I'll be interested in whatever answers are posted here.


73, Stan WB2LQF


On Tue, Nov 25, 2014 at 10:36 AM, Paul Bousquet wrote:

> Just wondering how important it is to have connect the GND terminals 
> between the KX3 and the KXPA100 amp. The KXPA100 manual states the 
> station ground should be connected to the KXPA100 GND thumbscrew. I 
> was just wondering since there are many cables connected between the 
> two if the additional GND connection is truly necessary.
>
> PS: This is my first attempt at communicating on the list and I just 
> wanted to say how helpful it has been. I have spent many hours 
> searching and getting information perviously posted.
>
> Thanks, Paul
> N1PEB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to sjl219 at optonline.net
>