[Elecraft] K2 plus N1MM logger in CW

[Don Wilhelm]

Ralf,

I cannot answer your N1MM question, but I can answer with certainty 
about the K2 'special cable' -
Yes, the 'computer' end of that cable can be plugged into a USB to 
serial adapter.
Just do *not* plug the adapter directly into the K2 AUX IO connector.

You may find some USB to serial adapters that will not work well at the 
slower 4800 baud rate used by the K2.  Try to find one with an FTDI chipset.

73,
Don W3FPR

On 11/25/2014 7:24 AM, DL6OAP wrote:
> Will the "special serial cable" work with a serial to USB adapter?
>
>