[Elecraft] K3 and FLDIGI Question

Bob NW8L nw8l at whitemesa.com
Mon Nov 24 11:14:38 EST 2014 

Fldigi has a TX level *attenuator* control on the status bar (to the left 
of the AFC button) that can be used to trim the TX level. It can be used 
to adjust levels downward to match those of other programs. It's not 
labeled and is often overlooked.

Bob NW8L

On Sun, 23 Nov 2014, david Moes wrote:

> Be Carfull   you really should have four bars and fifth blinking  if its 
> below that you can get some strange fluctuations on the output power. 
> so a compromise between programs is not the best idea. When the K3 is in 
> DATA A mode the mic gain will adjust the level for the line in so 
> adjustment when using different programs is easy.
>
>    level differences can be a problem with running multiple programs 
> for digital as they seems to have different algorithms and different 
> output levels   I no longer use FLdigi and have moved to MMVARI as it 
> has internal TX level adjustment  that is independent of the soundcard 
> level.      with this I can match the output  with the WSJT-X and 
> MMSSTV.   I can't seem to find this independent control for FLdigi. 
> I have only tried Coacomodem some time ago but I believe it too has an 
> independent level control that may help in matching levels with other 
> programs although I cant remember if that setting is linked to the 
> windows levels or not
>   I don't believe that WSJT-X has this though.
>
> David Moes
> President: Peterborough Amateur Radio Club.
> dmoes at nexicom.net
> VE3DVY,  VE3SD
>
> On 11/23/2014 18:06, James Bennett wrote:
>> John - thanks - that hit the nail on the head for me. The setting I had on 
> my external audio card?s output control was sufficient given the K3?s Mic 
> level that I was using with cocoaModem and WSJT-X. However, as you pointed 
> out, it was not sufficient enough for FLDIGI to ?tickle? the K3. So - I 
> increased the audio card output a bit until I saw the K3?s ALC bars light up, 
> then backed down on the K3?s Mic gain. Now it?s working just fine with 
> FLDIGI, cocoaModem, and WSJT-X.
>>
>> Much appreciated for the replies from both of you - case closed!
>>
>> 73, Jim / W6JHB
>>
>>> On   Sunday, Nov 23, 2014, at  Sunday, 2:13 PM, John Nelson 
> <john at happyvalleybiz.com> wrote:
>>>
>>> The same thing happens in my setup, if the audio level from the sound card 
> to the K3 is too low.  Nothing will appear in the ALC window, no matter how 
> high I turn up the mic gain.  Once establishing a minimum audio level, the 
> ALC will show four bars with the fifth flickering at a mic level of 7. It's 
> very touchy for me to get just right, but I am probably using sub-optimal 
> sound cards.  Works fine, though, for all the digital modes.
>>>
>>> John / W3DN
>>>
>>>
>>> On 11/23/2014 4:34 PM, James Bennett wrote:
>>>> Hi david - thanks for the reply to my post.
>>>>
>>>> Unfortunately, no improvement. I have everything set exactly as you 
> suggest (it was already that way) and the result is the same. I type in some 
> text, press T/R and: the K3 goes into transmit mode, RF flows out the radio 
> to the antenna, but no ALC indication on the K3 ALC meter. I shut down 
> FLDIGI, bring up cocoaModem and do EXACTLY the same thing with absolutely no 
> changes, and I get the RF out, but with the fifth ALC bar flickering. Funky, 
> huh?
>>>>
>>>> Jim / W6JHB
>>>>
>>>>
>>>>> On   Sunday, Nov 23, 2014, at  Sunday, 6:18 AM, david Moes 
> <dmoes at nexicom.net> wrote:
>>>>>
>>>>> Its not normal   verify that you have the correct sound card selected in 
> FLdigi and that the levels are set correctly.
>>>>>
>>>>> In the setup  under configure sound card  first tab
>>>>> "devices"  I have port audio set to the sound card for the rig 
> (soundblaster in my case)
>>>>> under "settings" sample rate is native and converter is medium 
> interpolation. and corrections all 0  and
>>>>> third tab "right channel" all buttons are clear unchecked.
>>>>>
>>>>> David Moes
>>>>> VE3DVY,  VE3SD
>>>>>
>>>>> On 11/22/2014 17:15, James Bennett wrote:
>>>>>> I?ve been using cocoaModem on my iMac for PSK31 QSO?s. Also, I use 
> WSJT-X for JT65 and JT9. Recently downloaded FLDIGI v 3.22.01 and gave it a 
> try. It works, but?..
>>>>>>
>>>>>> When I transmit, I get absolutely no indication of RF being sent. The 
> K3 goes into transmit mode, but I get no ALC action on the K3 meter. I know 
> I?m getting RF out because (1) my KPA500 (in standby mode) is showing 30 
> watts, and (2) I?ve had several QSO?s on PSK31. If I bring up cocoaModem and 
> transmit, I get the ALC action that I?m used to seeing: the fifth bar 
> flickering. Same thing with WSJT-X. But for some reason, when I transmit with 
> FLDIGI - nada, zip, zero indication.
>>>>>>
>>>>>> Is this ?normal?? If so, how would one ever set audio levels w/o having 
> any indication of audio actually flowing? What do I have set wrong?
>>>>>>
>>>>>> Thanks, Jim / W6JHB
>>>>>> ______________________________________________________________
>>>>>> Elecraft mailing list
>>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>>>
>>>>>> This list hosted by: http://www.qsl.net
>>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>>> Message delivered to dmoes at nexicom.net
>>>>> ______________________________________________________________
>>>>> Elecraft mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>>
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>> Message delivered to w6jhb at me.com
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to john at happyvalleybiz.com
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to w6jhb at me.com
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to dmoes at nexicom.net
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nw8l at whitemesa.com

More information about the Elecraft mailing list