[Elecraft] K3 and FLDIGI Question

[david Moes]

Its not normal   verify that you have the correct sound card selected in 
FLdigi and that the levels are set correctly.

In the setup  under configure sound card  first tab
"devices"  I have port audio set to the sound card for the rig 
(soundblaster in my case)
under "settings" sample rate is native and converter is medium 
interpolation. and corrections all 0  and
third tab "right channel" all buttons are clear unchecked.

David Moes
VE3DVY,  VE3SD

On 11/22/2014 17:15, James Bennett wrote:
> I’ve been using cocoaModem on my iMac for PSK31 QSO’s. Also, I use WSJT-X for JT65 and JT9. Recently downloaded FLDIGI v 3.22.01 and gave it a try. It works, but…..
>
> When I transmit, I get absolutely no indication of RF being sent. The K3 goes into transmit mode, but I get no ALC action on the K3 meter. I know I’m getting RF out because (1) my KPA500 (in standby mode) is showing 30 watts, and (2) I’ve had several QSO’s on PSK31. If I bring up cocoaModem and transmit, I get the ALC action that I’m used to seeing: the fifth bar flickering. Same thing with WSJT-X. But for some reason, when I transmit with FLDIGI - nada, zip, zero indication.
>
> Is this “normal”? If so, how would one ever set audio levels w/o having any indication of audio actually flowing? What do I have set wrong?
>
> Thanks, Jim / W6JHB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dmoes at nexicom.net