[Elecraft] KX3-2m CW problem

[Matt VK2RQ]

Just tried 2m CW using a begali paddle plugged in to the KX3 internal keyer, the CW sounds fine to me (up to 30wpm at least, unfortunately that's about as fast as I can go). I'm wondering if you might be having some sort of RF feedback issue? What sort of antenna setup do you have?

73, Matt VK2RQ

> On 22 Nov 2014, at 4:05 am, paul hippenmeyer <p_hippenmeyer at bluewin.ch> wrote:
> 
> Hi all,
> 
> CW on 2m is a problem. Especially with speeds higher than 25 wpm the timing of the sidetone becomes very unregular (eg. continues keying of dots only). With an external keyer the problem seems to be even worse. QRQ CW sounds very dirty.
> 
> CW on HF bands is perfect.
> 
> Any others who can confirm this problem?
> 
> 73, paul
> hb9axl
> 
> MCU 2.25
> DSP  1.30
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to matt.vk2rq at gmail.com