[Elecraft] [K3] N3flp rig control

[Joe Subich, W4TV]

> Connection power =RTS

Connection power is the *real problem* ... set it to NONE.
Setting power on either RTS or DTR unless you need it (and
it is not needed with the K3) sets those lines "on" or "keyed".

73,

   ... Joe Subich, W4TV
       microHAM America
       http://www.microHAM-USA.com
       http://groups.yahoo.com/group/microHAM

       support e-mail:  support at microHAM.com





On 2014-11-14 12:57 PM, Gene wrote:
> I don't know what is the real meaning of "rig control" but all I want to
> do is have the K3 go to the freq. that is shown on the Dx list when I
> click it.
>
> Joe, w4tv suggested to the K3Menu: PTT-KEY set to OFF which I did.
> I then set the following on the AClog rig settings:
>
> Connection power =RTS
> Ratio polling rate =500ms
> Sellected TEST Button, polling rig button came on and K3 reponded.
> Click "DONE" button at bottom. (NOT end test).
>
> The K3 now will go to the Freq/Call selected from the DX list.
>
> Thanks to all that responded.
>
> 73 for now,
> Gene W2BXR
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>