[Elecraft] Suggestions for good 192kHz external sound card for digital modes

[Byron Servies]

Yes. He had trouble with the driver installation.

He used to recommend the E-MU 0204, which I have never managed to get
working for the same reason.

YMMV,

Byron N6NUL

On Tue, Nov 11, 2014 at 8:59 PM, Phil Wheeler <w7ox at socal.rr.com> wrote:

>  Interesting that the Tascam (assuming it's the same model) is not
> recommended here
>
> http://www.telepostinc.com/soundcards.html#Table
>
> Phil W7OX
>
>  On 11/11/14 8:26 PM, Byron Servies wrote:
>
> FYI,
>
> The current high end Tascam is the US 366 and there is a $50 rebate through
> the end of the year, so it is $149.99 from just about everywhere (B&H is my
> favorite, too).
>
> 73, Byron N6NUL
>
> On Tue, Nov 11, 2014 at 8:07 PM, Jim Brown <jim at audiosystemsgroup.com> <jim at audiosystemsgroup.com>
> wrote:
>
>
>  On Tue,11/11/2014 4:08 PM, David Orman wrote:
>
>
>  I have a Native Instruments Audio Kontrol 1 which
> works much better, but it is USB powered (it seemed to be indicated this
> was a no-no for best decoding in digital modes in the other thread).
>
>
>  Not necessarily -- the problem with the SignalLink is that it's done
> badly. Both of the units I recommend are USB powered. In the pdf, I
> described how I tested. If you run JT65 and regularly see decodes in the
> range of -20 and have no issues with hum, buzz, or RFI, your unit is
> probably fine.
>
>
>


-- 
- Northern California Contest Club
- CU in the Cal QSO Party 3-4 Oct 2015
- www.cqp.org