[Elecraft] Incidental AM using FSK-D

Brian alsopb at nc.rr.com
Tue Nov 11 01:51:35 EST 2014


And what if this was done this with the standard 2.7 KHz filter?  Filter 
passband ripple has the the stock answer to what people are observing.

Also what about dynamic vs static differences.  Is it possible in the 
dynamic situation the differences would be greater?

It does sound like there is some confusion precision with accuracy.  A 
measuring device might offer high precision and resolution but lower 
absolute accuracy.  People often make accurate difference measurements 
with with a device which less accurate than the delta one observes.  If 
the difference are small, they can be quite accurate.

73 de Brian/K3KO


On 11/11/2014 02:13, Joe Subich, W4TV wrote:
>
>  > My K3 increases power by 10% when in Space as opposed to Mark.
>
> Two things here ...  10% is abut 0.4 dB.  How did you measure the power
> difference and did you do so with an instrument with enough resolution
> to accurately measure that difference at the power level you were using?
> For example a Bird Wattmeter can't possibly measure with that level of
> accuracy nor is one likely to be able to read an analog meter that
> closely.
>
> I have measured my K3 on RTTY with a wattmeter traceable to NIST and
> specified for 3% accuracy and have done so at four specific power
> levels (25, 55, 80 and 105 Watts) to eliminate any ALC non-linearity
> or PA compression from consideration.  The specific Mark/Space power
> levels were measured by placing the rig into transmit in FSK_D mode
> with the FSK input closed (Mark), measuring the power output for a
> given power setting, then opening the FSK input and noting the PO
> (and change).
>
> In all cases, the difference between MARK and SPACE was less than 2%
> (less than the meter's specified accuracy) and at two power levels (55
> and 80 W) the measured difference was less than 0.2W (<0.2 dB at 55W).
>
> These measurements were made with standard "High tones" (2125/2295 Hz)
> and the K3 was equipped with the optional 2.8 KHz, 8 pole IF filter.
>
> 73,
>
>     ... Joe, W4TV
>
>
> On 2014-11-10 8:42 PM, Bill Lewis wrote:
>> I am looking for information on how to eliminate incidental AM when using
>> FSK-D.
>>
>> My K3 increases power by 10% when in Space as opposed to Mark.
>>
>> Thanks much, Bill, W8NN
>>
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to lists at subich.com
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to alsopb at nc.rr.com
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2247 / Virus Database: 4189/8045 - Release Date: 11/10/14
>
>



More information about the Elecraft mailing list