[Elecraft] OK... I give up on what is happening...

[David Cole]

BTW Ken, I forgot to thank you for the reply!  THANK YOU!

-- 
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info


On Sun, 2014-11-09 at 07:52 -0500, Ken wrote:
> Actually a K3 should always be in LSB when in CW mode unless ALT has been activated and then REV shows up right under CW on the right hand side of the display.  
> 
> Ken WA8JXM
> 
> On Nov 4, 2014, at 11:17 AM, Matt VK2RQ wrote:
> 
> > To understand what sideband the radio is on in CW mode, listen to the radio's speaker and tune up the band. If the signals you hear go UP in pitch as you tune UP the band, it is using LSB. If the pitch of the signals goes DOWN as you tune UP the band, the radio is using USB. Once you understand whether the radio is set to use LSB or USB for a particular band, you can then set your digital mode software to match.
>