[Elecraft] KPA500

[Vic Rosenthal 4X6GP/K2VCO]

You could possibly have reversed the RF in and out cables. I did this 
the first time I tested my homebrew 4CX1000A amplifier. Worth checking.

On 1 Nov 2014 18:03, Steve Lett wrote:
> I just purchased the entire K line. I have the K3, P3 and KAT500 working
> just fine. I cannot get any power through the KPA500. It switches bands and
> it appears to be okay. But when I push the foot switch on my K3, the K3
> transmits but the KPA500 is not producing any power or SWR. I must be
> missing something. Do I need to change any of the default settings on the
> KPA500 menu? On the back of the amplifier, I have the antenna in and out
> connected as well as the 9 pin cable from the AUX on the amp to the AVP on
> the KAT500. Thank for your help.
>
>
>
> Steve, KB3TAW

-- 
73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/