[Elecraft] KPA500

[Phil Hystad]

> But when I push the foot switch on my K3, the K3
> transmits but the KPA500 is not producing any power or SWR.

What do you mean by the above statement?  What mode is the K3 set to?
What happens when you do a key-down in CW mode?

73, phil, K7PEH


> On Nov 1, 2014, at 9:03 AM, Steve Lett <steve at kb3taw.com> wrote:
> 
> I just purchased the entire K line. I have the K3, P3 and KAT500 working
> just fine. I cannot get any power through the KPA500. It switches bands and
> it appears to be okay. But when I push the foot switch on my K3, the K3
> transmits but the KPA500 is not producing any power or SWR. I must be
> missing something. Do I need to change any of the default settings on the
> KPA500 menu? On the back of the amplifier, I have the antenna in and out
> connected as well as the 9 pin cable from the AUX on the amp to the AVP on
> the KAT500. Thank for your help.
> 
> 
> 
> Steve, KB3TAW
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to phystad at mac.com