[Elecraft] K3: Repair Broken Power Pole

[Mike Reublin]

Jim,

Download the assembly manual. http://www.elecraft.com/K2_Manual_Download_Page.htm#K3

Gud Luck!

Mike NF4L

On May 31, 2014, at 6:48 PM, Jim Brown <jim at audiosystemsgroup.com> wrote:

> The plastic housing of the black power pole that is captive to the radio is broken, so I'm trying to take it apart to repair it. I started taking the right side panel off, removing all the perimeter screws, but there are two in the middle of the side panel, and six years after building these radios, I don't remember what I can remove without having a problem.  This radio is my spare, minimal stuff in it. K3/100, no tuner, no 2nd RX.
> 
> Suggestions?
> 
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nf4l at nf4l.com